Posted by Dave Rice (217.135.27.157) on July 07, 2001 at 09:44:12:
I have a few M571LMR boards with the same problem:
After a switch-off and about 10 Mins non-use the board looses it's CMOS settings. When it boots it reports "CMOS battery low" But, the battery has been replaced with a known good one and is OK. As I have more than one board doing this I suspect that there may be more around with this problem. Is this a known problem with older M571LMR's, and is there any known fix?
Any help would be appreciated.