Posted by VC Tech Support (65.7.49.48) on August 25, 2001 at 04:06:15:
In Reply to: Re: Davicom 9102 LAN -- does it ever work? posted by VC Tech Support on August 25, 2001 at 03:53:39:
Also, I would suggest visiting Davicom's web site to view the FAQ and latest driver downloads if you continue to have problems. Most of the problems I have found on the Internet have been from roughly a year ago.
http://www.davicom.com.tw
: When did you first start having problems with the LAN? What OS are you using?
: I have never had a problem with the onboard Davicom with the exception of one M599LMR that suddenly started dropping packets under Win98SE connected to a cable modem - I disabled the card and replaced with a Realtek and all was fine, but then a later change of the OS to Linux and now the Davicom works perfectly once again.
: Also, I am using a Davicom 9102 on a BookPC as I type this which is also through a cable modem.
: I also have another Davicom9102 in another Linux box that has been faithfully running for over a year now.
: I would check your IRQ's first off to amke sure there is not a conflict somewhere and also be sure that the BIOS settings are correct.
: You can download the latest Davicom9102 driver here:
: http://www.dejanet.com/vc/drivers/pcchips/m599lmr/
: : I have a M599LMR with built in Davicom 9102 LAN -- could never get it to work, so had it disabled but now I would really like to use it for a cable modem -- I have seen people all over the net asking about how to set it up but have seen no solutions.
: : The drivers seem to install fine, but it still says Adapter not working properly on boot up, and says the same in the device manager -- has anyone ever got it to work and how did you do it?