Posted by VC Tech Support (65.7.49.48) on November 11, 2001 at 01:50:10:
In Reply to: Turning off LAN support on TX PRO 11 (with 4 PCI slots) posted by James Mclean on November 04, 2001 at 08:41:45:
The TX-PRO II Motherboard with onboard LAN is actually the M571LMR.
The version number can be determined by looking at teh white silkscreened number printer near the keyboard connector.
There are no jumper settigns on this motherboard. The LAN (as well as all other settings) can be enabled/disabled in the BIOS.
To access the BIOS settings, turn the power on, and hold down the DEL key. You will be presented with a blue setup screen.
Move to the appropriate section and disable the onboard LAN (I think it is in Peripherals, but I am not looking at the setup screen at this time - simply move through all settings until you find it.
Then SAVE CHANGES AND EXIT and the computer will reboot.
-------------------------------------------
: I have a TX PRO 11 board with 4 PCI slots and I'm not sure of the model no. Which jumper do use to turn off LAN support?