Posted by VC Tech Support (65.7.49.48) on June 03, 2001 at 17:24:55:
In Reply to: M571 dead IDE posted by Joseph brown on May 31, 2001 at 18:57:27:
You can enable/disable the IDE Channels in the BIOS. You can access teh BIOS by holding down the DEL when you first power up the computer.
: What is required to use an IDE expansion board on the M571 mainboard. Post reports no IDE and diags. show IDE 0 to be bad.
: Thanks,
: Joe
: P. S. Please send reply to my e-mail also.